4195KA, KB, KC, and KS Controllers
Instruction Manual
Form 5207
April 2007
7-20
Fittings
Key Description Part Number
Note
The quantity shown make up the fitting for one end
of the tubing or hose. Specify quantity of fittings
required.
Fittings for 3/8-inch tubing, casing- or
yoke-mounted controller with regulator
Connector, brass (2 req’d) 1B885618992
Elbow, brass (2 req’d) 1B884618992
Fittings for 3/8-inch tubing,
pipestand-mounted controller with regulator
Elbow, brass (2 req’d) 1B884618992
Key Description Part Number
Fittings for 3/8-inch tubing,
all controllers without regulator
Connector, brass (1 req’d) 1B885618992
Elbow, brass (1 req’d) 1B884618992
Fittings for 1/2-inch synthetic rubber hose,
all controllers w/ or w/o regulator
Connector, 316 SST 15A6002XK32
Elbow, 316 SST 15A6002XK12
Swivel, 316 SST (2 req’d) 15A6002XK22
Emerson Process Management
Marshalltown, Iowa 50158 USA
Cernay 68700 France
Sao Paulo 05424 Brazil
Singapore 128461
www.Fisher.com
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they
are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or
applicability. We reserve the right to modify or improve the designs or specifications of such products at any time without notice.
Neither Emerson, Emerson Process Management, nor any of their affiliated entities assumes responsibility for the selection, use and maintenance
of any product. Responsibility for the selection, use and maintenance of any product remains with the purchaser and end-user.
EFisher Controls International LLC 1983, 2007; All Rights Reserved Printed in USA
Fisher is a mark owned by Fisher Controls International LLC, a member of the Emerson Process Management business division of Emerson
Electric Co. Emerson Process Management, Emerson, and the Emerson logo are trademarks and service marks of Emerson Electric Co. All
other marks are the property of their respective owners.
To Previous Page
Loading...
