Emerson Fisher KC Series - Process and Set Point Indicator Assembly

4195KA, KB, KC, and KS Controllers
Instruction Manual
Form 5207
April 2007
7-11
32B1532-A / DOC
Figure 7-2. Process and Set Point Indicator Assembly for Bourdon Tube Controllers
Process and Set Point Indicator
Assembly (key 56) (figures 7-2 and 7-3)
Key Description Part Number
With capsular element ass’y
101 Indicator ass’y
The part numbers listed here for key 101 are for the indicator
ass’y only. Individual part numbers are listed in the Indicator
Assembly and the Capsular Element Assembly subsections of
this parts list. Key numbers for individual ass’y parts also
appear in figures 7-4 and 7-5.
For use w/o remote set pt 39A1126X012
For use w/remote set pt 39A1126X022
113 Capsular element ass’y See Key 113 table
The part numbers listed in the key 113 table are for the
complete capsular element ass’y. Individual ass’y parts are
listed in the Capsular Element Assembly subsection of this
parts list. Key numbers for individual ass’y parts also appear in
figure 7-4.
Key Description Part Number
127 Machine screw, fill hd, 18−8 SST
4 req’d to attach the capsular element ass’y
to the indicator ass’y (key 101) 1J8415X0012
With Bourdon tube
101 Indicator ass’y
The part numbers listed here for key 101 are for the indicator
ass’y only. Individual part numbers are listed in the Indicator
Assembly subsection of this parts list. Key numbers for
individual ass’y parts also appear in figure 7-4.
For use w/o remote set pt 39A1126X012
For use w/remote set pt 39A1126X022
379 Process Tube Retainer, S30400 (304 SST) 18A8870X012
380 Machine screw, pan hd, 18−8 SST 1H2674X0012
381 Process tubing ass’y, SST 12B4951X012
382 Link ass’y, steel/SST 22B0469X012
383* Bourdon tube See Key 383 table
384 Screw, self-tapping, pl steel (2 req’d) 16A9772X022
*Recommended spare parts