4195KA, KB, KC, and KS Controllers
Instruction Manual
Form 5207
April 2007
7-4
Key Description Part Number
57 Pressure control block, CF8M (316 SST Casting)
1/4-18 NPT Internal Process Connection
1 req’d for all types w/o remote set pt and
w/o ext fdback, except none required
for units with Bourdon tube isolator 26A6962X012
2 req’d for all types w/remote set pt and
w/o ext fdback, except 1 req’d for units
with Bourdon tube isolator 26A6962X012
2 req’d for all types w/ext fdback and
w/o remote set pt, except 1 req’d for
units with Bourdon tube isolator 26A6962X012
3 req’d for all types w/ext fdback and
w/remote set pt, except 2 req’d for units
with Bourdon tube isolator 26A6962X012
1/2-14 NPT External Process Connection
For all types w/o remote set pt
and w/o ext fdbck (1 req’d) 20B7911X012
Pressure control block, CF8M (316 SST Casting)
1/4-18 NPT Internal Process Connection
1 req’d for all types w/o remote set pt and
w/o ext fdback, except none required
for units with Bourdon tube isolator 26A6962X012
For all types w/remote set pt
and w/o ext fdbck
(1 req’d) 26A6962X012
(1 req’d) 20B7911X012
For all types w/ext fdback and
w/o remote set pt
(1 req’d) 26A6962X012
(1 req’d) 20B7911X012
For all types w/ext fdback and
w/remote set pt
(2 req’d) 26A6962X012
(1 req’d) 20B7911X012
58 Cap screw, hex hd, SST
2 req’d for use w/each pressure
control block (key 57) 1A352538992
59 Hex reducing nipple, (use only when specified)
1/2 NPT external
All ranges up to 0-345 bar (0-5000 psig)
Steel 16A6992X012
SST 16A6992X022
60 Reducing adaptor, (use only when specified)
1/2 NPT internal
All ranges up to 0-345 bar (0-5000 psig)
Steel 16A6993X012
SST 16A6993X022
61 Process scale, aluminum
For indicator ass’y (key 101) See Key 61 tables
Key Description Part Number
62 Remote set pt ass’y (suffix letter M)
The part numbers listed for key 62 are for the complete remote
set point (suffix letter M) ass’y. Individual assembly parts are
listed in the Remote Set Point Assembly subsection of the
parts list. Key numbers for individual ass’y parts also appear in
figure 7-6.
Remote set pt ass’y (suffix letter M)
N09902 (Nickel Alloy)
0.8 bar (12 psig) span 36A6988X032
1.7 bar (24 psig) span 36A6988X042
SST
0.8 bar (12 psig) span 36A6988X012
1.7 bar (24 psig) span 36A6988X022
64 Machine screw, fill hd, 18−8 SST
4 req’d to attach process and set pt
indicator ass’y (key 56) to frame 1J8415X0012
65 Feedback link ass’y, aluminum/brass/SST 16A7036X012
71 Machine screw, fill hd, 18−8 SST
For all 4195KA, KB, and KS Series (4 req’d)
For all 4195KC Series (6 req’d) 1P4743X0012
72 Blowout plug, silicone 2V766005312
Note
Key numbers 73 through 76 are only for use
with a 4195K Series controller with a Bourdon
tube element. Travel stops are required when
the calibration starting point is greater than 0
psig. Use only when specified.
73 Upper travel stop, G10100 (steel)
Use only when specified. See Note above. 26A9768X012
74 Lower travel stop, G10100 (steel)
Use only when specified. See Note above. 27B0400X012
75 Machine screw, fill hd, 18−8 SST
Use only when specified. See Note above.
If only upper travel stop installed, none req’d − − −
If both upper and lower travel stop installed,
2 req’d to mount upper travel stop 1H2676X0012
76 Machine screw, fill hd, 18−8 SST
Use only when specified. See Note above.
If only upper travel stop installed,
2 req’d to mount upper travel stop 1V413038982
If both upper and lower travel stop installed,
2 req’d to mount lower travel stop 1V413038982
120 Machine screw, fill hd, 18−8 SST
2 req’d to attach remote set pt ass’y (suffix
letter M) to indicator ass’y base plate 1J8415X0012
127 Machine screw, fill hd, 18−8 SST
(4 req’d) 1J8415X0012
131 Machine screw, fill hd, S30400 (304 SST)
2 req’d to attach rate/reset manifold
(key 136) to frame manifold (key 135) 1C101535042
135 Frame manifold, A03600 (aluminum)
For all types except w/suffix letter E,
auto/manual station 28A0756X012
To Next Page
Loading...
