Emerson Liebert eXM - Figure 23 Liebert Intellislot Web Card Display; Liebert Intellislot Web Card-Optional

Option Installation
Liebert
®
eXM
™
38
5.2.1 Liebert IntelliSlot
™
Unity Cards—IS-UNITY-LIFE, IS-UNITY-S, IS-UNITY-DP
• IS-UNITY-LIFE: This standard card is used for communication between the Liebert eXM and
Emerson’s Trellis
®
NMS and LIFE
™
services.
• IS-UNITY-DP: This card can be used instead of the standard card if communication to two
third-party platforms is required. Third-party platforms include SNMP and 485 (Modbus/Bacnet)
protocols. This card would still be used for communication between the Liebert eXM and
Emerson’s Trellis NMS and LIFE Services. All communication protocols are active
simultaneously.
• Liebert IntelliSlot Dry Contact Card (IS-RELAY): Provides dry contact alarm information,
including: On Battery, On Bypass, Low Battery, Summary Alarm, UPS Fault and On UPS signals
for communication to a remote monitoring system or for use with Liebert MultiLink
®
software.
• IS-485EXI: The Liebert IntelliSlot 485 EXI Card provides connection to a Liebert SiteLink-E
™
allowing Liebert SiteScan
®
Web 4.0 monitoring and control of your Liebert equipment.
5.3 Liebert IntelliSlot Web Card—Optional
An optional Web card is available that provides remote access to the UPS. A wide variety of status
and summary information is available through an Ethernet connection.
Figure 23 Liebert IntelliSlot Web card display