Need help?Do you have a question about the Emerson Liebert eXM and is the answer not in the manual?
General| Topology | Double Conversion Online |
|---|---|
| Frequency | 50/60 Hz |
| Power Factor | 0.9 |
| Display | LCD |
| Product Type | UPS |
| Phase | Single-Phase |
| Communication Ports | USB |
| Operating Temperature | 0°C to 40°C |
| Humidity | 0% to 95% (non-condensing) |
| Dimensions (H x W x D) | Varies by model |
| Weight | Varies by model |
| Battery Type | Sealed Lead-Acid (SLA) |
Discusses risks of high leakage current and essential earth connection.
Choose location based on service, air circulation, and environment.
Factors affecting cable choice and sizing, input/output/battery cables.
Safety requirements for external circuit breakers and protection.
Access to connections, busbars, front panel removal.
Fuse blocks, back-feed breaker wiring, shunt trip coil requirement.
Ground busbar connection, grounding requirements, EMI reduction.
External circuit breakers for input AC supply, overcurrent protection.
Steps for connecting power cables, safety precautions.
Control panel and LCD functions for operator interaction.
Control buttons for shutdown, inverter control, and alarm silencing.
Access to information and settings via LCD menus.
Describes various operating modes like Normal, Battery, ECO, Bypass.
Steps for starting the UPS after installation and commissioning.
Step-by-step procedure to start the UPS from a powered-down state.
Procedure to transfer load from inverter to maintenance bypass.
Procedure to transfer load from maintenance bypass back to inverter.
Emergency Shutdown procedure using EPO.
Detailed electrical specifications and parameters.
Safety precautions for performing maintenance on the UPS.
To Next Page