Emerson Micro Motion 1700 - Page 46

Sensor and transmitter terminal designations (continued)Table 4-6:
Wire color Sensor terminal Transmitter terminal Function
White 9 9 Left pickoff –
b. Tighten the screws to hold the wires in place.
c. Ensure integrity of gaskets, grease all O-rings, then replace the junction box and
transmitter housing covers and tighten all screws, as required.
4.4.1 Sensor and transmitter terminals
All ELITE, H-Series, and T-Series sensor, and 2005 or newer F-Series
sensor terminals
Figure 4-14:
D
I
H
F
E
A
B
C
G
A. Violet
B. Yellow
C. Orange
D. Brown
E. White
F. Green
G. Red
H. Gray
I. Blue
Mounting and sensor wiring for 9-wire remote installations
42 Micro Motion
®
Model 1700 and 2700