Installation types for Model 1700 and Model 2700 transmitters (continued)Table 1-1:
Model code Description
E Remote enhanced core processor (painted aluminum housing) with remote
transmitter
C Remote mount 9-wire (painted aluminum housing)
B Remote core processor with remote transmitter
M Remote mount 4-wire (stainless steel housing)
P Remote mount 9-wire (stainless steel housing)
H
(1)
Remote mount 4-wire (painted aluminum housing) for connecting to Com-
pact Density Meter (CDM), Fork Density Meter (FDM), Fork Viscosity Meter
(FVM)
(1) This option is only available with the Model 2700 FOUNDATION Fieldbus
™
transmitter
Integral installation (model code I)Figure 1-2:
The transmitter is mounted directly to the sensor. Integral installations do not require separate transmitter
installation. Power supply and I/O must be field wired to the transmitter.
A. Transmitter
B. Sensor
Planning
2 Micro Motion
®
Model 1700 and 2700
To Next Page
Loading...
