Emerson MICRO MOTION 2700 - Configure Descriptor; Configure Message

-
Message
-
Date
• Sensor parameters
-
Sensor Serial Number
-
Sensor Material
-
Sensor Liner Material
-
Sensor Flange Type
5.6.1 Configure Descriptor
Display
Not available
ProLink II ProLink > Configuration > Device > Descriptor
ProLink III Device Tools > Configuration > Informational Parameters > Transmitter
Field Communicator Configure > Manual Setup > Info Parameters > Transmitter Info > Descriptor
Overview
Descriptor lets you store a description in transmitter memory. The description is not used in
processing and is not required.
Procedure
Enter a description for the transmitter.
You can use up to 16 characters for the description.
5.6.2 Configure Message
Display
Not available
ProLink II ProLink > Configuration > Device > Message
ProLink III Device Tools > Configuration > Informational Parameters > Transmitter
Field Communicator Configure > Manual Setup > Info Parameters > Transmitter Info > Message
Overview
Message lets you store a short message in transmitter memory. This parameter is not used
in processing and is not required.
Procedure
Enter a short message for the transmitter.
Your message can be up to 32 characters long.
Configure device options and preferences
Configuration and Use Manual 95