Emerson MICRO MOTION 2700 - Enable Write-Protection on the Transmitter Configuration

7.3 Enable write-protection on the transmitter
configuration
Display OFF-LINE MAINT > CONFIG > LOCK
ProLink II ProLink > Configuration > Device > Enable Write Protection
ProLink III Device Tools > Configuration > Write-Protection
Field Communicator Configure > Manual Setup > Info Parameters > Transmitter Info > Write Protect
Overview
If the transmitter is write-protected, the configuration is locked and nobody can change it
until it is unlocked. This prevents accidental or unauthorized changes to the transmitter
configuration parameters.
Completing the configuration
138 Micro Motion
®
Model 2700 Transmitters with Analog Outputs