Emerson MICRO MOTION 2700 - 10.2.1 Switch between secured and unsecured mode using ProLink II; 10.2.2 Switch between secured and unsecured mode using ProLink III

3. Scroll until RESET appears beneath the current totalizer value.
4. Select.
5. Select again to confirm.
6. Scroll to EXIT.
7. Select.
• To reset the volume totalizer:
1. Scroll until the volume totalizer value appears.
2. Select.
3. Scroll until RESET appears beneath the current totalizer value.
4. Select.
5. Select again to confirm.
6. Scroll to EXIT.
7. Select.
• To reset the gas standard volume totalizer:
1. Scroll until the gas standard volume totalizer value appears.
2. Select.
3. Scroll until RESET appears beneath the current totalizer value.
4. Select.
5. Select again to confirm.
6. Scroll to EXIT.
7. Select.
9.8 Reset inventories
ProLink II ProLink > Totalizer Control > Reset Inventories
ProLink > Totalizer Control > Reset Mass Inventory
ProLink > Totalizer Control > Reset Volume Inventory
ProLink > Totalizer Control > Reset Gas Volume Inventory
ProLink III Device Tools > Totalizer Control > Totalizer and Inventories > Reset Mass Inventory
Device Tools > Totalizer Control > Totalizer and Inventories > Reset Volume Inventory
Device Tools > Totalizer Control > Totalizer and Inventories > Reset Gas Inventory
Device Tools > Totalizer Control > Totalizer and Inventories > Reset All Inventories
Transmitter operation
Configuration and Use Manual 161