A.5 Codes and abbreviations used in display menus
Codes and abbreviations used in display menusTable A-3:
Code or abbrevi-
ation Definition Comment or reference
ACK ALARM Acknowledge alarm
ACK ALL Acknowledge all alarms
ACT Action
ADDR Address
AO 1 SRC Fixed to the process variable assigned to the primary out-
put
AO1 Analog output 1 (primary mA output)
AO2 Analog output 2 (secondary mA output)
AUTO SCRLL Auto Scroll
BKLT
B LIGHT
Backlight
CAL Calibrate
CH A Channel A
CH B Channel B
CH C Channel C
CHANGE PASSW
CHANGE CODE
Change password or passcode Change the password or passcode re-
quired for access to display functions
CONFG Configuration
CORE Core processor
CUR Z Current zero
CUSTODY XFER Custody transfer
D EV Discrete event Events configured using the enhanced
event model
DENS Density
DGAIN, DRIVE % Drive gain
DI Discrete input
DISBL Disable Select to disable
DO1 Discrete output 1
DO2 Discrete output 2
DSPLY Display
E1OR2 Event 1 or Event 2 Events configured using the basic
event model
ENABL Enable Select to enable
ENABLE ACK Enable acknowledge all Enable or disable the ACK ALL function
Using the transmitter display
Configuration and Use Manual 259
To Next Page
Loading...
