Emerson MICRO MOTION 2700 - 7 Completing the configuration; 7.1 Test or tune the system using sensor simulation

Options for HART variables
Options for HART variablesTable 6-13:
Process variable Primary Varia-
ble (PV)
Secondary
Variable (SV)
Third Variable
(TV)
Fourth Varia-
ble (QV )
Standard
Mass flow rate ✓ ✓ ✓ ✓
Line (Gross) Volume flow rate ✓ ✓ ✓ ✓
Temperature ✓ ✓ ✓
Density ✓ ✓ ✓
Drive gain ✓ ✓ ✓
Mass total ✓
Line (Gross) Volume total ✓
Mass inventory ✓
Line (Gross) Volume inventory ✓
Tube frequency ✓
Meter temperature ✓
LPO amplitude ✓
RPO amplitude ✓
Board temperature ✓
External pressure ✓ ✓ ✓
External temperature ✓ ✓ ✓
Gas standard volume flow rate ✓ ✓ ✓ ✓
Gas standard volume total ✓
Gas standard volume inventory ✓
Live zero ✓
Petroleum measurement
API density ✓ ✓ ✓
API volume flow rate ✓ ✓ ✓ ✓
API volume total ✓
API volume inventory ✓
API average density ✓ ✓ ✓
API average temperature ✓ ✓ ✓
API CTL ✓
Concentration measurement
ED density at reference temperature ✓ ✓ ✓
ED specific gravity ✓ ✓ ✓
Integrate the meter with the control system
Configuration and Use Manual 127