Overview menuFigure D-5:
Identification
1 Tag
2 Model
3 Xmtr Serial Num
4 Sensor Serial Num
5 Date
6 Descriptor
7 Message
1
Revisions
1 Universal
2 Field Device
3 DD Revision
4 Transmitter Software
5 CP Software
6 ETO Number
Mat. of Construction
1 Tube Wetted Mat.
2 Tube Lining
3 Sensor Flange
Check Status
1 Refresh Alerts
2 Dev Status:
3 Comm Status:
Primary Purpose Variables
Mass Flow Rate
Volume Flow Rate
Density
Shortcuts
1 Device Information
2 Totalizer Control
3 Zero Calibration
4 Variables
5 Trends
6 Meter Verification *
1
3
2
1
2
3
On-Line Menu >
1 Overview
Device Information
1 Identification
2 Revisions
3 Mat. of Construction
4 Licenses
5 Weights and Measures **
* Displayed only if meter
verification is enabled
.
** Displayed only if the Weights
& Measures application is
enabled. Menu numbers are
adjusted as required.
4
Weights and Measures
1 Cstdy Trnsfr Approval
2 W&M Software Version
Using the Field Communicator with the transmitter
326 Micro Motion
®
Model 2700 Transmitters with Analog Outputs
To Next Page
Loading...
