4. The Engineering Assistant Device Connection screen will appear,
see Figure 7-8.
Figure 7-8: Engineering Assistant Device Connection Screen
5. Select the Search button located in the lower right hand
corner of the screen. Engineering Assistant will begin to search
for connected devices.
6. When the search is completed, select the device to
communicate with and select Send Configuration button.
Note
After the configuration is sent to the device, saving the
configuration file is recommended. The user can select the
Save button on the Save/Send screen or select Save from the
program menu.
Once the configuration is finished being sent to the device, the
user will be notified by a pop-up dialog box.
7. If finished with the configuration process, close Engineering
Assistant.
January2024 Quick Start Guide
Quick Start Guide 31
To Next Page
Loading...
