Reference Manual
00809-0100-4530, Rev BA
July 2009
Rosemount 5300 Series
5-18
Using the Setup
Functions
Use the Setup function if you are already familiar with the configuration
process for the Rosemount 5300 Series transmitter or for changes to the
current settings:
Figure 5-9. Setup functions in
RRM.
1. Start the RRM software.
2. In the RRM workspace choose the
appropriate icon for the configuration of
transmitter parameters:
• Wizard: the Wizard is a tool that
guides you through the basic
configuration procedure of a
Rosemount 5300 Series
transmitter
• General: configuration of general
settings such as measurement
units and communication
parameters. This window also lets
you configure which LCD variables
to be displayed, see Section 6:
Operation
• Tank: configuration of Tank
Geometry, Tank Environment, and
Volume
• Output: configuration of Analog
Output
• Echo Curve: disturbance echo
handling
• Advanced: advanced
configuration
General
Tank Geometry,
Environment,
Volume
Analog Output
Echo Curve
Advanced
Wizard
To Next Page
Loading...
