Reference Manual
00809-0100-4530, Rev BA
July 2009
5-19
Rosemount 5300 Series
Guided Setup The following description shows how to use the RRM Guided Setup. The
corresponding HART commands (375 Field Communicator Fast Key
Sequence) and F
OUNDATION Fieldbus parameters are also shown.
The Guided Setup is useful if you are unfamiliar with the Rosemount 5300
Series transmitter.
1. Start the Guided Setup
Start RRM. It automatically presents a list of available transmitters. Select
the desired transmitter. Now the transmitter is connected and the Guided
Setup window appears automatically:
2. Start the Configuration Wizard
In the Guided Setup window, click the Run Wizard... button and follow the
instructions.
Now you will be guided through a short transmitter installation procedure.
NOTE!
The Guided Setup is an extended installation guide that includes more than
just the configuration Wizard. It can be disabled by deselecting the Show
Introduction Dialog after Connect check box in the Application Settings
window (see menu option View>Application Preferences).
To Next Page
Loading...
