This manual contains instructions for installation and operation of the 56 Advanced Dual-Input
Analyzer. The following list provides notes concerning all revisions of this document.
Rev. Level Date Notes
A 08/11 This is the initial release of the product manual. The manual has been
reformatted to reflect the Emerson documentation style and updated to
reflect any changes in the product offering.
B 11/12 Add new feature - configuration transfer via USB. Add new section for
existing features - PID control and TPC relay activation, Non-Incendive Field
Wiring drawings.
C 11/13 Add sec. 9 - Advanced Relay Functions. Add procedure for Software Update
and Configuration Transfer via USB (for units manufactured October 2012
and later). Add procedure for Data Logger and Event Logger Download to
USB. Add new sections for HART and Profibus Communications. Add
Appendix 1 – HART and Device and Appendix 2 - HART Status Bits.
D 04/17 Updated the Address and Emerson Logo.
SAFETY MESSAGES
Procedures and instructions in this section august require special precautions to ensure the
safety of the personnel performing the operations. Information that raises potential safety
issues is indicated by a warning symbol ( ). This symbol identifies a potential hazard.
About This Document
CAUTION
To Next Page
Loading...
