Product matrix - OCX 8800 (continued)Table 1-1:
3 Hastelloy
Code Accessories
0 None
2 Cal. gas/flow rotometers & ref. gas set
3 Cal. gas/flow rotometers & ref. gas set w/blowback
4 Cal. gas/flow rotometers & ref. gas set w/blowback - panel
mounted
02 In-situ filter (stainless steel only)
3
Example OCX88C111011H30600
1. Provide details of the existing mounting plate as follows:
Plate with studs Bolt circle diameter, number, and arrangement of
studs, stud thread, stud height above mounting plate.
Plate without studs Bold circle diameter, number, and arrangement of
holes, thread, depth of stud mounting plate with ac-
cessories.
AccessoriesTable 1-2:
Part number Description
1A99119H01 Oxygen test gas bottle; 0.4% O
2
, balance N
2
1A99119H02 Oxygen test gas bottle; 8.0% O
2
, balance N
2
1A99119H07 CO test gas bottle; 1,000 ppm CO, balance air
1A99120H02 Regulator for oxygen (may need 2)
1A99120H03 Regulator for CO test gas
1A99119G06 Wall mount bracket for test gas bottles
1A99119G05 Test gas regulators kit
1A99119G04 Test gas bottles kit
1A9929H01 Moore industries SPA for low O
2
alarm, high COe alarm, calibration status, and
unit fail
4851B40G01 Wall or pipe mounting kit
1A9978H02 375 field communicator with 12 megabyte buffer, model no. 375HR1EKLU
6A00171G01 Power line filter kit
6A00288G01 Sample tube support, 18 in. (457 mm)
6A00288G02 Sample tube support, 3 ft (0.91 mm)
6A00288G03 Sample tube support, 6 ft (1.83 m)
6A00288G04 Sample tube support, 9 ft (2.7 m)
Description and specifications
Reference Manual 17
To Next Page
Loading...
