EMKO EAOM-6 - Page 31

V
L31/L3N
V
L23/L2N
V
L12/L1N
Hz
RPM
PROGPROG
RESETRESET TESTTEST
V
L31/L3N
V
L23/L2N
V
L12/L1N
Hz
RPM
PROGPROG
RESETRESET TESTTEST
V
L31/L3N
V
L23/L2N
V
L12/L1N
Hz
RPM
PROGPROG
RESETRESET TESTTEST
V
L31/L3N
V
L23/L2N
V
L12/L1N
Hz
RPM
PROGPROG
RESETRESET TESTTEST
Alternator Voltage
Lower Limit
Value
Alternator Voltage
Lower Limit
Value
Alternator Voltage
Lower Limit
Parameter
Alternator Voltage
Upper Limit
Parameter
Press button for
accessing to the
Value
Press button for
saving the value
and accessing to the
Parameter
Change the
parameter with and
buttons
NOTE : Other technician paramaters can be accessed as explained for
For exiting from programming mode, press
31
NOTE : If no operation is performed for 20 seconds, the device exits from the
programming mode and turns to the main operation screen.