EasyManua.ls Logo

EMS AIR-FLOW MASTER - Technical Data

EMS AIR-FLOW MASTER
118 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
94
TECHNICAL DATA
Description
Manufacturer EMS SA, CH-1260 Nyon, Switzerland
Model AIR-FLOW MASTER
®
Classication EN 60601-1 - Class I
- Applied part, Type B
- IP 20 unit
- IP X1, foot pedal
Classication 93/42/EEC Class IIa
Operating mode Continuous operation
Supply voltage 100-240 VAC 50-60Hz
Power consumption max. 100 VA
Fuses T 1.6 A 250 VAC (Ø5 X 20mm, time lag, low
breaking capacity)
Water supply 1 to 5 Bar (100 to 500 kPa)
Compressed air supply 5.5 to 7.5 Bar (550 to 750 kPa)
Weight (approx.) 5.0 kg
Dimensions in mm (HxWxD) 225 x 225 x 295
Operating conditions +10°C to +40°C
30% to 75% relative humidity
Altitude max. 3000 m
Validated life time of the
handpiece
500 sterilization cycles
Storage and
transport conditions
-10°C to +40°C
10% to 95% relative humidity
500 hPa to 1060 hPa air pressure
FB-580_HF_Rev A-01_Not Util AIR-FLOW MASTER.indd 94 07.02.2018 14:51:01

Table of Contents

Related product manuals