EMS AIR-FLOW MASTER - Filling the Powder Chambers

28
AIR-FLOW
CLASSIC+SOFT
POWDERS
ONLY
®
AIR-FLOW
CLASSIC+SOFT
POWDERS
ONLY
®
AIR-FLOW
CLASSIC+SOFT
POWDERS
ONLY
®
AIR-FLOW
CLASSIC+SOFT
POWDERS
ONLY
®
AIR-FLOW
PERIO+PLUS
POWDERS
ONLY
®
AIR-FLOW
®
PERIO+PLUS
POWDER CHAMBER
AIR-FLOW
®
CLASSIC+SOFT
POWDER CHAMBER
Filling the powder chambers
Check the condition of the threads on the powder chamber, on the cap and on the O-ring seals.
Please refer to the information provided in the chapter "Maintenance".
Make sure that the powder chambers are absolutely dry. Moisture can cause the powder to cake
and provoke a blocking of the circuit.
To avoid clogging the unit do not ll the powder chambers above the line "Max". Pour the powder
into the AIR-FLOW CLASSIC+SOFT powder chamber. The AIR-FLOW PERIO+PLUS powder chamber
having a different design follow the instructions as shown above.
Put the powder diffuser back to its position as soon as you nish to ll the powder chamber.
FB-580_HF_Rev A-01_Not Util AIR-FLOW MASTER.indd 28 07.02.2018 14:49:48