EMS AIR-FLOW MASTER - Operating the Unit; Switching on

36
AIR-FLOW
CLASSIC+SOFT
POWDERS
ONLY
®
AIR-FLOW
POWDERS
ONLY
®
PERIO+PLUS
AIR-FLOW
CLASSIC+SOFT
POWDERS
ONLY
®
AIR-FLOW
POWDERS
ONLY
®
PERIO+PLUS
AIR-FLOW
CLASSIC+SOFT
POWDERS
ONLY
®
AIR-FLOW
POWDERS
ONLY
®
PERIO+PLUS
ON
OPERATING THE UNIT
Switching On
When the unit is switched on, the control lamps lights up and the powder chambers are under pressure.
After 15 min. of inactivity, the unit turns itself on standby mode. Placing a nger on the sensitive
zone wakes the unit from standby mode. The unit returns to its previous conguration.
The powder chambers light up only when the powder spray is used.
FB-580_HF_Rev A-01_Not Util AIR-FLOW MASTER.indd 36 07.02.2018 14:49:58