EMS AIR-FLOW MASTER - End of the Treatment; Powder and Water Purge

54
AIR-FLOW
CLASSIC+SOFT
POWDERS
ONLY
®
AIR-FLOW
POWDERS
ONLY
®
PERIO+PLUS
AIR-FLOW
CLASSIC+SOFT
POWDERS
ONLY
®
AIR-FLOW
POWDERS
ONLY
®
PERIO+PLUS
1x
Purge ON
1
2
END OF THE TREATMENT
Remove the powder chambers before switching the unit off and store them in a dry place.
The powder should not remain over a determined time inside the powder chamber. Read the
instructions delivered with the powders.
After each treatment a purge is necessary to remove all residues of powder and liquid inside the
cords and the handpieces. During a prolonged stop of the unit, it is important to empty the irrigation circuit
to avoid the formation of biolm.
Powder and water purge
FB-580_HF_Rev A-01_Not Util AIR-FLOW MASTER.indd 54 07.02.2018 14:50:18