60
Cleaning the dome
Disassemble the dome to facilitate cleaning.
Regularly clean and disinfect the cap.
Clean the surface of the cap using a cleaning wipe with proven efcacy (Enzol 2%).
Disinfect the surface of the cord using 70% isopropyl alcohol or other EPA recognized surface disinfectant,
following carefully the instructions provided by the disinfection solution manufacturer.
The ribs of the dome must be aligned with the lugs of the ring. The two pieces must be correctly
aligned and interconnected.
The cap must be absolutely dry before closing.
The cap cannot be sterilized.
FB-580_HF_Rev A-01_Not Util AIR-FLOW MASTER.indd 60 07.02.2018 14:50:28
To Next Page
Loading...
