EMS AIR-FLOW MASTER - Cleaning the Powder Chamber

62
AIR-FLOW
CLASSIC+SOFT
POWDERS
ONLY
®
AIR-FLOW
POWDERS
ONLY
®
PERIO+PLUS
Cleaning the Powder Chamber
Unscrew the dome and pull out the powder diffuser.
Regularly clean this part.
The cap and the powder diffuser must be absolutely dry before reassembling.
Do not switch both powder diffusers during the reassembling.
Do not use needles to clean the powder chamber valve (risk of perforation)
FB-580_HF_Rev A-01_Not Util AIR-FLOW MASTER.indd 62 07.02.2018 14:50:32