EMS AIR-FLOW MASTER - Purge Switch and Mode

50
AIR-FLOW
CLASSIC+SOFT
POWDERS
ONLY
®
AIR-FLOW
POWDERS
ONLY
®
PERIO+PLUS
Purge switch and mode
The purge switch allows to depressurize the powder chambers for safe removal. It also controls the
"purge" function (see following pages).
Beeps will be emitted when the purge switch is pressed and the powder chamber lights will blink. After
approximately 1 minute the unit will return to its previous conguration (or when pressing the switch a
second time).
FB-580_HF_Rev A-01_Not Util AIR-FLOW MASTER.indd 50 07.02.2018 14:50:10