EMS AIRFLOW Prophylaxis Master User Manual

ENGLISH
FB-618/AU – rev.E – ed.2019/08
33/48
It is the duty of the user to ensure that the reprocessing processes, including resources,
materials and personnel, are capable to reach the required results and maintained over the time:
keeping actual the validation of the reprocessing processes is under the responsibility of the user.
Storage
Store the sterilized instruments in a dry, clean and dust free environment at a temperature of
5°C to 40°C.
Service life
If the number of permissible re-sterilization cycles is restricted, this will be stated in the
product’s specific Instructions for Use (if any) and/or in the “Service life” section of the “Technical
Description” chapter.
The products have been designed for a large number of sterilization cycles. The materials used in
their manufacture were selected accordingly. However, with every renewed preparation for use,
thermal and chemical stresses will result in the ageing of the products.
Always replace products that present sign of worn-out or of early degradation, regardless of the
number of sterilization cycles left unused.
DO NOT expose the products to temperature exceeding the 138°C.

EMS AIRFLOW Prophylaxis Master Specifications

General

Water Flow Rate	Adjustable
Powder Flow Rate	Adjustable
Technology	AIRFLOW, PERIOFLOW, PIEZON
Water Supply	Integrated water tank
Control	Foot control
Handpieces	AIRFLOW, PERIOFLOW, PIEZON
Water tank capacity	Approx. 800 ml
Water pressure	1 - 5 bar (100 - 500 kPa)
Operating mode	Continuous
Type	Air polishing system
Powder Type	Erythritol, Glycine
Nozzle Types	Standard, Perio
Power Supply	100-240 V, 50/60 Hz