Need help?Do you have a question about the Emtron DX-2 and is the answer not in the manual?
Overview of the main components of the DX-2 amplifier.
Instructions for opening the amplifier's shipping carton and handling.
Specifies the ambient conditions for safe and optimal amplifier operation.
Details on connecting the amplifier's power supply and grounding.
Description of the front panel controls like BAND, PLATE TUNE, LOAD TUNE, ON/OFF, OPR/STBY.
Explanation of the front panel LED indicators for various parameters.
Guide for connecting the amplifier to the transceiver via RF and control cables.
Details on the amplifier's RF components including the GU84B tube and tuning circuits.
Description of the central control unit managing amplifier functions and protections.
Step-by-step guide for tuning the amplifier for optimal performance on different bands.
Guidance on operating the amplifier in different modes and achieving good linearity.
Diagnosing and resolving problems related to the amplifier not powering on.
Troubleshooting fan operation, including high speed or non-operation.
Understanding and resolving FAULT light indicators and protection cut-offs.
Addressing issues related to sparks or discharges within the RF section.
Procedures for adjusting various potentiometers on the control board.
Fine-tuning the SWR protection threshold for antenna by-pass.
Adjusting the Electronic Bias Switch sensitivity for optimal operation.
Calibration steps for the front panel LED display indicators.
High-level overview of the amplifier's functional modules and signal flow.
Detailed diagram showing connector pinouts and adjustment points on the control board.
To Next Page
General
