Cerabar PMC11, PMC21, PMP11, PMP21
42 Endress+Hauser
Operability
Plug-on display PHX20
(optional)
Devices with valve plug can be fitted with the optional local display PHX20.
Designation Option
1)
Plug-on display PHX20, IP65 RU
1) Product Configurator, order code for "Accessories"
A 1-line liquid crystal display (LCD) is used. The local display shows measured values, fault messages
and information messages. The device display can be turned in 90° steps. Depending on the
orientation of the device, it is therefore easy to read the measured values.
Technical data
Display: 4-digit, red LED display
Digit height: 7.62 mm; programmable decimal point setting
Display range: -1999...9999
Accuracy: 0.2% of span ±1 digit
Electrical connection: to transmitter with 4 to 20 mA output and elbow plug DIN 43 650, with
reverse polarity protection
Power supply for display: not required, self-powered by the current loop
Voltage drop: ≤ 5 V (corresponds to load: max. 250 Ω)
Conversion rate: 3 measurements per second
Damping: 0.3 to 20 s (configurable)
Data backup: non-volatile EEPROM
Error message: • HI: Overranging
• LO: Underranging
Programming: via 2 buttons, menu-guided, scaling of display range, decimal point,
damping, error message
Degree of protection: IP 65
Effect of temperature on display: 0.1% / 10 K
Electromagnetic compatibility
(EMC):
Interference emission as per EN 50081, interference immunity as per EN
50082
Permitted current load: max. 60 mA
Ambient temperature: 0 to +60 °C (+32 to +140 °F)
Housing material: Plastic Pa6 GF30, blue
Front screen made of PMMA, red
Order number: 52022914
To Next Page
Loading...
