Endress+Hauser CM442R - Page 47

Liquiline CM442R/CM444R/CM448R
Endress+Hauser 47
Oxygen sensors
Oxymax COS22D
• Sterilizable sensor for dissolved oxygen
• With Memosens technology or as an analog sensor
• Product Configurator on the product page: www.endress.com/cos22d
Technical Information TI00446C
Oxymax COS51D
• Amperometric sensor for dissolved oxygen
• With Memosens technology
• Product Configurator on the product page: www.endress.com/cos51d
Technical Information TI00413C
Oxymax COS61D
• Optical oxygen sensor for drinking water and industrial water measurement
• Measuring principle: quenching
• With Memosens technology
• Product Configurator on the product page: www.endress.com/cos61d
Technical Information TI00387C
Memosens COS81D
• Sterilizable, optical sensor for dissolved oxygen
• With Memosens technology
• Product Configurator on the product page: www.endress.com/cos81d
Technical Information TI01201C
Chlorine sensors
CCS142D
• Membrane-covered amperometric sensor for free chlorine
• Measuring range 0.01 to 20 mg/l
• With Memosens technology
• Product Configurator on the product page: www.endress.com/ccs142d
Technical Information TI00419C
Ion-selective sensors
ISEmax CAS40D
• Ion selective sensors
• Product Configurator on the product page: www.endress.com/cas40d
Technical Information TI00491C
Turbidity sensors
Turbimax CUS51D
• For nephelometric measurements of turbidity and solids in wastewater
• 4-beam scattered light method
• With Memosens technology
• Product Configurator on the product page: www.endress.com/cus51d
Technical Information TI00461C
SAC and nitrate sensors
Viomax CAS51D
• SAC and nitrate measurement in drinking water and wastewater
• With Memosens technology
• Product Configurator on the product page: www.endress.com/cas51d
Technical Information TI00459C