Endress+Hauser Deltapilot M FMB50 - Page 19

Deltapilot M FMB50/51/52/53
Endress+Hauser 19
Devices with M12 plug
PIN assignment for M12 connector
Endress+Hauser offers the following accessories for devices with an M12 plug:
Plug-in jack M 12x1, straight
• Material: body PA; coupling nut CuZn, nickel-plated
• Degree of protection (fully locked): IP66/67
• Order number: 52006263
Plug-in jack M 12x1, elbowed
• Material: body PBT/PA; coupling nut GD-Zn, nickel-plated
• Degree of protection (fully locked): IP66/67
• Order number: 71114212
Cable 4x0.34 mm² (20 AWG) with M12 socket, elbowed, screw plug, length 5 m (16 ft)
• Material: body PUR; coupling nut CuSn/Ni; cable PVC
• Degree of protection (fully locked): IP66/67
• Order number: 52010285
Devices with 7/8" plug
PIN assignment for 7/8" connector
External thread: 7/8 - 16 UNC
• Material: housing / body CuZn, nickel-plated
• Protection: IP66/68
Cable gland
Terminals
For wire cross-sections of 0.5 to 2.5 mm² (20 to 14 AWG)
A0011175
PIN Meaning
1 Signal +
2 Not assigned
3 Signal –
4Earth
A0011176
PIN Meaning
1 Signal –
2 Signal +
3 Not assigned
4Earth
Approval Type Clamping area
Standard, CSA GP
ATEX II1/2G or II2G Ex ia,
IEC Ex ia Ga/Gb or Ex ia Gb,
FM/ CSA IS
Plastic M20x1.5 5 to 10 mm (0,2 to 0,39 in)
ATEX II1/2D Ex t, II1/2GD Ex ia,
II3G Ex nA,
IEC Ex t Da/Db
Metal M20x1.5 (Ex e) 7 to 10.5 mm (0,28 to 0,41 in)
21
3
4
+
–
nc
2
1
3
4
+
–
nc