Endress+Hauser Deltapilot M FMB50 - Commissioning with an operating menu

Deltapilot M FMB50/51/52/53
Endress+Hauser 55
FMB50 (continued) Additional ordering information (optional)
500 Additional Operating language:
AA English
AB German
AC French
AD Spanish
AE Italian
AF Dutch
AK Chinese
AL Japanese
550 Calibration:
F1 Factory calibration certificate, 5-point
F2 DKD/DAkkS calibration certificate 10-point
570 Service:
HA Oil and grease removed
1)
1) Only device, not accessory or enclosed accessory
HB Cleaned for oxygen service
1)
HC Cleaned from PWIS (PWIS = paint wetting impairment substances)
1)
HK Surface quality Ra<0.38um electropolished (wetted)
IA Configured min alarm current
IB Configured HART Burst Mode PV
I9 Special version
580 Test, certificate:
JA EN10204-3.1 wetted material, inspection certificate
JB NACE MR0175 wetted
JF EN10204-3.1 AD2000 material wetted parts, excepting process membrane inspection certificate
KB EN10204-3.1 wetted material + Ra, (Ra= surface roughness), dimensional check, inspection certificate
KD EN10204-3.1 helium leak test, inspection certificate
KE EN10204-3.1 pressure test, inspection certificate
KF EN10204-3.1 measurement Delta ferrite content, inspection certificate
KG EN10204-3.1 PMI test* (PMI = positive material identification), inspection certificate
* Meter body and process isolating diaphragm not included.
K9 Special version
590 Other approvals:
LA SIL
LC WHG overfill prevention
LQ KTW potable water approval
LR NSF potable water approval
LW CoC Certificate of Compliance
600 Separate housing:
MA Cable PE, 2m/80inch + housing mounting bracket, wall/pipe, 304
MB Cable PE, 5m/200inch + housing mounting bracket, wall/pipe, 304
MC Cable PE, 10m/400inch + housing mounting bracket, wall/pipe, 304
MH Cable FEP, 5m/200inch IP69K + housing mounting bracket, wall/pipe, 304
610 Accessory mounted:
NA Overvoltage protection