Deltapilot M FMB50/51/52/53
Endress+Hauser 51
Hardware and software for
onsite and remote operation
Commubox FXA195
For intrinsically safe HART communication with FieldCare via the USB interface. For details refer to
TI00404F/00/EN.
Field Xpert SFX100
Compact, flexible and robust industry handheld terminal for remote parametrization and measured value
inspection via the HART current output (4-20mA).
For details refer to Operating Instructions BA00060S/04/EN.
FieldCare
FieldCare is an Endress+Hauser asset management tool based on FDT technology. With FieldCare, you can
configure all Endress+Hauser devices as well as devices from other manufacturers that support the FDT
standard.
FieldCare supports the following functions:
• Configuration of transmitters in offline and online mode
• Loading and saving device data (upload/download)
• Documentation of the measuring point
Connection options:
• HART via Commubox FXA195 and the USB port on a computer
• PROFIBUS PA via segment coupler and PROFIBUS interface card
• FOUNDATION Fieldbus via NI interface card
For further information ➝ www.endress.com
To Next Page
Loading...
