Deltapilot M FMB50/51/52/53
Endress+Hauser 43
Material (not wetted) Housing
P01-xMxx3xxx-14-xx-xx-xx-002
Front view, left-hand side view, top view
Item num-
ber
Component part Material
1
F31 housing, RAL 5012 (blue) Die-cast aluminum with protective powder-coating on
polyester base
2
Cover, RAL 7035 (gray) Die-cast aluminum with protective powder-coating on
polyester base
3Cover seal EPDM
4 Sight glass Mineral glass
5 Sight glass seal Silicone (VMQ)
6 External ground terminal AISI 304 (1.4301)
7 Nameplates Plastic film
8 Attachement for tie-on label AISI 304 (1.4301)/ AISI 316 (1.4401)
9 Pressure compensation filter PA6 GF10
10 Pressure compensation filter, O-ring Silicone (VMQ)
11 Sealing ring EPDM
12 Snap ring PC Plastic
13 Seal of cable gland and blind plug EPDM/NBR
14 Cable gland Polyamide (PA) or CuZn nickel-plated
15 Blind plug PBT-GF30 FR
for dust ignition-proof, Ex d, FM XP and CSA XP:
AISI 316L (1.4435)
16 Cover clamp Clamp AISI 316L (1.4435), screw A4