Deltapilot M FMB50/51/52/53
70 Endress+Hauser
Configuration data sheet
Level The following configuration data sheet has to be filled in and included with the order if the version
"K - Customized level" has been selected in feature 90 "Calibration; unit" in the product structure.
Pressure Engineering Unit Output Unit (Scaled unit)
❏ mbar ❏ mmH
2
O ❏ mmHg ❏ Pas Mass Length Volume Volume Percent
❏ bar ❏ mH
2
O ❏ kPa
❏ ftH
2
O ❏ kgf/cm
2
❏ MPa ❏ kg ❏ m ❏ l ❏ gal ❏ %
❏ psi ❏ inH
2
O ❏ t ❏ dm ❏ hl ❏ Igal
❏ lb ❏ cm
❏ mm ❏ m
3
❏ ft
3
❏ ft ❏ in
3
❏ inch
Example
Empty pressure [a]:
Low pressure value (empty) ______________
[pres. eng. unit]
Empty calibration [a]:
Low level value (empty) ______________
[Scaled Unit]
Full pressure [b]:
High pressure value (full) ______________
[pres. eng. unit]
Full calibration [b]:
High level value (full) ______________
[Scaled Unit]
Display Information
1st Value Display
1)
2nd Value Display
1)
❏ Main Value ❏ none (Default)
❏ Main Value [%]
❏ Pressure
❏ Current [mA] (HART only)
❏ Temperature
1)
Depending on sensor and comunication variant
Damping
Damping: ___________ sec (Default 2 sec)
(b)
(a)
0 mbar
300 mbar (4.5 psi)
3 m (9.8 ft)
0 m