Endress+Hauser Deltapilot M FMB50 - FMB52 (Continued)

Deltapilot M FMB50/51/52/53
Endress+Hauser 61
FMB52 (continued)
90 Calibration; Unit:
A Sensor range; %
B Sensor range; mbar/bar
C Sensor range; kPa/MPa
D Sensor range; mm/mH2O
E Sensor range; inH2O/ftH2O
F Sensor range; psi
J Customized pressure; see additional spec.
K Customized level; see additional spec.
Y Special version
100 Probe connection:
15 ..... mm cable, PE 500...400.000 mm
25 ..... in cable, PE 500...400.000 mm
35 ..... mm cable, FEP 20...15748 inch
45 ..... in cable, FEP 20...15748 inch
99 Special version
110 Process connection:
Threaded connection
GGC Thread ISO228 G1-1/2, AlloyC
GGJ Thread ISO228 G1-1/2, 316L
RGJ Thread ANSI MNPT1-1/2, 316L
ANSI flanges
AFJ 2" 150lbs RF, 316/316L, flange ANSI B16.5
AGJ 3" 150lbs RF, 316/316L, flange ANSI B16.5
AHJ 4" 150lbs RF, 316/316L, flange ANSI B16.5
EN flanges
CEJ DN40 PN10/16 B1, 316L, flange EN1092-1
CFJ DN50 PN10/16 B1, 316L, flange EN1092-1
CGJ DN80 PN10/16 B1, 316L, flange EN1092-1
CHJ DN100 PN10/16 B1, 316L, flange EN1092-1
JIS flanges
KEJ 10K 40A RF, 316L, flange JIS B2220
KFJ 10K 50A RF, 316L, flange JIS B2220
KGJ 10K 80A RF, 316L, flange JIS B2220
KHJ 10K 100A RF, 316L, flange JIS B2220
YYY Special version
170 Material of the process isolating diaphragm :
Coating Process isolating diaphragm Meter body
B - Alloy C276 (2.4819) 316L (1.4435) or Alloy C276 (2.4819)
1)
1) The material of the meter body corresponds to the material of the process connection.
L Gold>Rhodium (→ ä 26) Alloy C276 (2.4819) Alloy C276 (2.4819)
N Gold>Platin (→ ä 26) Alloy C276 (2.4819) Alloy C276 (2.4819)
Y Special version
180 Fill fluid:
2Inert oil
3 Synthetic oil, FDA
9 Special version
190 Seal:
A FKM Viton
JEPDM
L Kalrez 6375
U None, welded cell