Endress+Hauser Deltapilot M FMB50 - FMB50 (Continued)

Deltapilot M FMB50/51/52/53
54 Endress+Hauser
FMB50 (continued)
80 Reference accuracy:
DPlatinum
GStandard
Y Special version
90 Calibration; Unit:
A Sensor range; %
B Sensor range; mbar/bar
C Sensor range; kPa/MPa
D Sensor range; mm/mH2O
E Sensor range; inH2O/ftH2O
F Sensor range; psi
J Customized pressure; see additional spec.
K Customized level; see additional spec.
Y Special version
110 Process connection:
Threaded connection
GGC Thread ISO228 G1-1/2, AlloyC
GGJ Thread ISO228 G1-1/2, 316L
RGJ Thread ANSI MNPT1-1/2, 316L
ANSI flanges
AEJ 1-1/2" 150lbs RF, 316/316L, flange ANSI B16.5
AFJ 2" 150lbs RF, 316/316L, flange ANSI B16.5
AGJ 3" 150lbs RF, 316/316L, flange ANSI B16.5
AHJ 4" 150lbs RF, 316/316L, flange ANSI B16.5
EN flanges
CEJ DN40 PN10/16 B1, 316L, flange EN1092-1
CFJ DN50 PN10/16 B1, 316L, flange EN1092-1
CGJ DN80 PN10/16 B1, 316L, flange EN1092-1
CHJ DN100 PN10/16 B1, 316L, flange EN1092-1
JIS flanges
KEJ 10K 40A RF, 316L, flange JIS B2220
KFJ 10K 50A RF, 316L, flange JIS B2220
KGJ 10K 80A RF, 316L, flange JIS B2220
KHJ 10K 100A RF, 316L, flange JIS B2220
Hygienic connections
MRJ DIN11851 DN50 PN25 cap-nut, 316L, EHEDG, 3A
MZJ DIN11851 DN40 PN25 cap-nut, 316L, EHEDG, 3A
NDJ DIN11864-1 A DN50 PN16 tube DIN11866-A, slotted nut, 316L, EHEDG, 3A
S4J NEUMO BioControl D50 PN16, 316L, 3A
TXJ SMS 2" PN25, 316L, EHEDG, 3A
TIJ DRD DN50 65mm PN25, 316L
TRJ Varivent N pipe DN40-162 PN40, 316L, EHEDG, 3A
UNJ Universal adapter 44mm 316L, EPDM molded seal, EHEDG
UOJ Universal adapter 44mm 316L, 6" ext., EPDM molded seal, EHEDG
UPJ Universal adapter 44mm 316L, 3A, EHEDG, incl. silicone molded seal
UQJ Universal adapter 44mm 316L, ext. 6",3A, EHEDG, incl. silicone molded seal
USJ Anderson short 2-3/16", 316L, 3A, incl. silicone seal
UTJ Anderson long 6-1/2", 316L, 3A, incl. silicone seal
Clamp connections
TDJ Tri-Clamp ISO2852 DN40-51 (2"), 316L, DIN32676 DN50, EHEDG, 3A
YYY Special version
170 Material of the process isolating diaphragm :
Coating Process isolating diaphragm Meter body
B - Alloy C276 (2.4819) 316L (1.4435) or Alloy C276 (2.4819)
1)
1) The material of the meter body corresponds to the material of the process connection.
L Gold>Rhodium (→ ä 26) Alloy C276 (2.4819) Alloy C276 (2.4819)
Y Special version
180 Fill fluid:
2Inert oil
3 Synthetic oil, FDA
9 Special version
190 Seal:
U None, welded cell