Deltapilot M FMB50/51/52/53
Endress+Hauser 5
FMB50/51/52 universal application
• Modular probe program to ensure optimum process adaptation
• FMB50 compact version: installation in the tank from below or from the side
• FMB51/52 rod and cable extension: installation from above, i.e. easy to retrofit ground tanks, no additional
opening in the tank floor
FMB50 optimized for the food-processing and pharmaceutical industry
• All typical flush-mounted process connections can be supplied
• Welding flanges
• Stainless steel housing
• All the sanitary process connections are gap-free and can be cleaned so that the unit is free of residue, e.g.
CIP cleaning
• USDA/H1-approved transfer liquid as per FDA Directive
• 3A approval or EHEDG approvals
P01-DB5xxxxx-12-xx-xx-xx-004
FMB53 for level measurement in water and wastewater
• The housing with the electronic insert is mounted outside shafts and tanks in such a way that it is protected
from flooding. The extension cable is secured with a suspension clamp.
• The measuring cell tube made of stainless steel (AISI 316L) and the Alloy process isolating diaphragm allow
use in aggressive media such as wastewater for example.
• Extension cable up to 400 m (1312 ft) in length (up to 100 m (328 ft) in Ex-areas) without strain relief.
• Special measuring cell with gold/rhodium coating for applications in which severe hydrogen formation can
occur (e.g. digested sludge); → ä 26.
• Special measuring cell with gold/platinum coating for acids, alkalis or sea water; → ä 26.
To Next Page
Loading...
