Deltapilot M FMB50/51/52/53
Endress+Hauser 47
Note!
The wetted device components are listed in the "Mechanical construction" (→ ä 30 ff) and "Ordering
information" (→ ä 53 ff) sections.
DIN/EN flanges
Endress+Hauser supplies DIN/EN flanges made of stainless steel AISI 316L as per material numbers 1.4435
or 1.4404. With regard to their stability-temperature property, the materials 1.4435 and 1.4404 are grouped
together under 13EO in EN 1092-1 Tab. 18. The chemical composition of the two materials can be identical.
TSE Certificate of Suitability (Transmissible Spongiform Encephalopathy)
The following applies to all process wetted device components:
• They do not contain any materials derived from animals.
• No auxiliaries or operating materials derived from animals are used in production or processing.
10 Socket Alloy C4 (2.4610)
11 Rod Alloy C4 (2.4610)
12 Socket Alloy C4 (2.4610)
13 Probe tube Alloy C22 (2.4602)
14 Process isolating diaphragm and
meter body
→ ä 53 ff
15 Seals → ä 53 ff
16 Suspension clamp AISI 316L (1.4404)
17 Clamping jaw PA-GF
Item number Component part Material
To Next Page
Loading...
