Deltapilot M FMB50/51/52/53
Endress+Hauser 59
FMB51 (continued) Additional ordering information (optional)
You can enter the versions for the specific feature in the following table. The versions entered make up the
complete order code.
500 Additional Operating language:
AA English
AB German
AC French
AD Spanish
AE Italian
AF Dutch
AK Chinese
AL Japanese
550 Calibration:
F1 Factory calibration certificate, 5-point
570 Service:
HA Oil and grease removed
1)
1) Only device, not accessory or enclosed accessory
HB Cleaned for oxygen service
1)
HC Cleaned from PWIS (PWIS = paint wetting impairment substances)
1)
IA Configured min alarm current
IB Configured HART Burst Mode PV
I9 Special version
580 Test, certificate:
JA EN10204-3.1 wetted material, inspection certificate
JB NACE MR0175 wetted
KD EN10204-3.1 helium leak test, inspection certificate
KE EN10204-3.1 pressure test, inspection certificate
KG EN10204-3.1 PMI test* (PMI = positive material identification), inspection certificate
* Meter body and process isolating diaphragm not included.
K9 Special version
590 Other approvals:
LA SIL
LC WHG overfill prevention
LQ KTW potable water approval
LR NSF potable water approval
600 Separate housing:
MA Cable PE, 2m/80inch + housing mounting bracket, wall/pipe, 304
MB Cable PE, 5m/200inch + housing mounting bracket, wall/pipe, 304
MC Cable PE, 10m/400inch + housing mounting bracket, wall/pipe, 304
MH Cable FEP, 5m/200inch IP69K + housing mounting bracket, wall/pipe, 304
610 Accessory mounted:
NA Overvoltage protection
620 Accessory enclosed:
QJ Welding neck G1-1/2, 316L
QK Welding neck G1-1/2, 316L, 3.1, EN10204-3.1 material, inspection certificate
QL Weld-in tool adapter G1-1/2, brass
RL Plug-in jack M12
RM Plug-in jack M12, 90deg
RN Plug-in jack M12, 90deg+5m cable
850 Firmware version:
78 01.00.zz, HART, DevRev01
895 Identification:
Z1 Measuring point (TAG)
Z2 Bus address
10 20 30 40 50 70 80 90 100 110 170 180 190 500 550 570 580 600 610 620 850 895
FMB51 -
To Next Page
Loading...
