Endress+Hauser Deltapilot M FMB51 - 6.4 Position Zero Adjustment

Deltapilot M FMB50/51/52/53
56 Endress+Hauser
FMB50 (continued)
You can enter the versions for the specific feature in the following table. The versions entered make up the
complete order code.
620 Accessory enclosed:
QJ Welding neck G1-1/2, 316L
QK Welding neck G1-1/2, 316L, 3.1, EN10204-3.1 material, inspection certificate
QL Weld-in tool adapter G1-1/2, brass
QP Welding flange DRD DN50 65mm, 316L
QR Welding fl. DRD DN50 65mm, 316L 3.1, EN10204-3.1 material, inspection certificate
QS Weld-in tool flange DRD DN50 65mm, brass
QT Welding neck Uni D65, 316L
QU Welding neck Uni D65, 316L, 3.1, EN10204-3.1 material, inspection certificate
Q1 Weld-in tool adapter Uni D65, brass
Q2 Welding neck Uni D85, 316L
Q3 Welding neck Uni D85, 316L, 3.1, EN10204-3.1 material, inspection certificate
Q5 Welding neck Uni 6" D65, 316L
Q6 Welding neck Uni 6" D65, 316L, 3.1, EN10204-3.1 material, inspection certificate
Q7 Weld-in tool adapter Uni 6" D65, brass
RA Adapter Uni > DIN11851 DN40, 316L, slotted nut
R1 Adapter Uni > DIN11851 DN40, 316L, 3.1, slotted nut, EN10204-3.1 material, inspection certificate
RB Adapter Uni > DIN11851 DN50, 316L, slotted nut
R2 Adapter Uni > DIN11851 DN50, 316L, 3.1, slotted nut, EN10204-3.1 material, inspection certificate
RC Adapter Uni > DRD DN50 65mm, 316L
R3 Adapter Uni > DRD DN50 65mm, 316L, 3.1, EN10201-3.1 material, inspection certificate
RD Adapter Uni > Clamp 2", 316L
R4 Adapter Uni > Clamp 2", 316L, 3.1, EN10201-3.1 material, inspection certificate
RF Adapter Uni > Varivent, 316L
R5 Adapter Uni > Varivent, 316L, 3.1, EN10201-3.1 material, inspection certificate
RL Plug-in jack M12
RM Plug-in jack M12, 90deg
RN Plug-in jack M12, 90deg+5m cable
850 Firmware version:
78 01.00.zz, HART, DevRev01
895 Identification:
Z1 Measuring point (TAG)
Z2 Bus address
10 20 30 40 50 70 80 90 110 170 180 190 500 550 570 580 590 600 610 620 850 895
FMB50 -