Deltapilot M FMB50/51/52/53
50 Endress+Hauser
Remote operation All software parameters are accessible depending on the position of the write protection switch on the device.
HART
Remote operation via:
• FieldCare (see "Hardware and software for onsite and remote operation" section → ä 51 ff) with
Commubox FXA195 (see "Hardware and software for onsite and remote operation" section → ä 51 ff)
• Field Xpert SFX100. Field Xpert is an industrial PDA with integrated 3.5" touchscreen from Endress+Hauser
based on Windows Mobile. It communicates via wireless with the optional VIATOR Bluetooth modem
connected to a HART device point-to-point or wireless via WiFi and Endress+Hauser’s Fieldgate FXA520.
Field Xpert also works as a stand-alone device for asset management applications. For details refer to
BA00060S/00/EN.
PROFIBUS PA
Remote operation via:
• FieldCare (see "Hardware and software for onsite and remote operation" section → ä 51 ff)
– Profiboard: For connecting a PC to PROFIBUS
– Proficard: For connecting a laptop to PROFIBUS
FOUNDATION Fieldbus
Remote operation via:
• Use an FF-configuration program for example NI-FBUS Configurator, to
– connect devices with "FOUNDATION Fieldbus signal" into an FF-network
– set FF-specific parameters
Operation with NI-FBUS Configurator:
The NI-FBUS Configurator is an easy-to-use graphical environment for creating linkages, loops, and a
schedule based on the fieldbus concepts.
You can use the NI-FBUS Configurator to configure a fieldbus network as follows:
– Set block and device tags
– Set device addresses
– Create and edit function block control strategies (function block applications)
– Configure vendor-defined function and transducer blocks
– Create and edit schedules
– Read and write to function block control strategies (function block applications)
– Invoke Device Description (DD) methods
– Display DD menus
– Download a configuration
– Verify a configuration and compare it to a saved configuration
– Monitor a downloaded configuration
– Replace a virtual device by a real device
– Save and print a configuration
• FieldCare (see "Hardware and software for onsite and remote operation" → ä 51 ff)
– NI PCMCIA-FBUS series 2 to connect a laptop to FF.
Note!
For further information please contact your local Endress+Hauser Sales Center.
To Next Page
Loading...
