Endress+Hauser Levelflex FMP54 - Commissioning (Block-Based Operation); Block Configuration

Levelflex FMP51, FMP52, FMP54
106 Endress+Hauser
Feature 010 of the product structure Approval
AEJ 1-1/2" 150lbs RF, 316/316L flange ANSI B16.5
AEK 1-1/2" 150lbs, PTFE>316/316L flange ANSI B16.5
AEM 1-1/2" 150lbs, AlloyC>316/316L flange ANSI B16.5
AFJ 2" 150lbs RF, 316/316L flange ANSI B16.5
AFK 2" 150lbs, PTFE>316/316L flange ANSI B16.5
AFM 2" 150lbs, AlloyC>316/316L flange ANSI B16.5
AGJ 3" 150lbs RF, 316/316L flange ANSI B16.5
AGK 3" 150lbs, PTFE>316/316L flange ANSI B16.5
AGM 3" 150lbs, AlloyC>316/316L flange ANSI B16.5
AHJ 4" 150lbs RF, 316/316L flange ANSI B16.5
AHK 4" 150lbs, PTFE>316/316L flange ANSI B16.5
AJJ 6" 150lbs RF, 316/316L flange ANSI B16.5
AJK 6" 150lbs, PTFE>316/316L flange ANSI B16.5
AKJ 8" 150lbs RF, 316/316L flange ANSI B16.5
AOJ 4" 600lbs RF, 316/316L flange ANSI B16.5
AQJ 1-1/2" 300lbs RF, 316/316L flange ANSI B16.5
AQK 1-1/2" 300lbs, PTFE>316/316L flange ANSI B16.5
AQM 1-1/2" 300lbs, AlloyC>316/316L flange ANSI B16.5
ARJ 2" 300lbs RF, 316/316L flange ANSI B16.5
ARK 2" 300lbs, PTFE>316/316L flange ANSI B16.5
ARM 2" 300lbs, AlloyC>316/316L flange ANSI B16.5
ASJ 3" 300lbs RF, 316/316L flange ANSI B16.5
ASK 3" 300lbs, PTFE>316/316L flange ANSI B16.5
ASM 3" 300lbs, AlloyC>316/316L flange ANSI B16.5
ATJ 4" 300lbs RF, 316/316L flange ANSI B16.5
ATK 4" 300lbs, PTFE>316/316L flange ANSI B16.5
AZJ 4" 900lbs RF, 316/316L flange ANSI B16.5
A6J 2" 1500lbs RF, 316/316L Flansch ANSI B16.5
A7J 3" 1500lbs RF, 316/316L flange ANSI B16.5
A8J 4" 1500lbs RF, 316/316L flange ANSI B16.5
GGJ Thread ISO228 G1-1/2, 316L
GIJ Thread ISO228 G1-1/2, 200bar, 316L
GJJ Thread ISO228 G1-1/2, 400bar, 316L
RAJ Thread ANSI MNPT1-1/2, 200bar, 316L
RBJ Thread ANSI MNPT1-1/2, 400bar, 316L
RGJ Thread ANSI MNPT1-1/2, 316L
TAK Tri-Clamp ISO2852 DN40-51 (2"), 3A, PTFE>316L
TDK Tri-Clamp ISO2852 DN40-51 (2"), PTFE>316L
TFK Tri-Clamp ISO2852 DN70-76.1 (3"), PTFE>316L
TJK Tri-Clamp ISO2852 DN38 (1-1/2"), PTFE>316L
TLK Tri-Clamp ISO2852 DN70-76.1 (3"), 3A, PTFE>316L
TNK Tri-Clamp ISO2852 DN38 (1-1/2"), 3A, PTFE>316L