Endress+Hauser Levelflex FMP54 - Page 118

Levelflex FMP51, FMP52, FMP54
118 Endress+Hauser
Mounting kit, isolated
Accessory Description
Mounting kit, isolated
can be used for
• FMP50
• FMP51
• FMP54
• FMP56
• FMP57
D
1
2
A0013586
 40 Scope of supply of the mounting kit:
1 Insulating sleeve
2 Eye-bolt
For reliably insulated fixing of the probe.
Maximum process temperature: 150 °C (300 °F)
For rope probes 4 mm (¹⁄₆ in) or 6 mm (1/4 in) with PA>steel:
• Diameter D = 20 mm (0.8 in)
• Order-No.: 52014249
For rope probes 6 mm (¹⁄₄ in) or 8 mm (1/3 in) with PA>steel:
• Diameter D = 25 mm (1 in)
• Order-No.: 52014250
Due to the risk of electrostatic charge, the insulating sleeve is not suitable for use
in hazardous areas. In these cases the fixing must be reliably grounded.

The mounting kit can also be ordered directly with the device (see the
Levelflex product structure, feature 620 "Accessory Enclosed", option PG
"Mounting kit, isolated, rope").