Endress+Hauser Levelflex FMP54 - Integration into a FOUNDATION Fieldbus Network; Device Description (DD); Integration into the FOUNDATION Fieldbus Network

Levelflex FMP51, FMP52, FMP54
82 Endress+Hauser
P Q
PEEK 7 mm (0.28 in) 95 mm (3.74 in)
PFA 10 mm (0.39 in) 37 mm (1.46 in)
316L 4 mm (0.16 in) 45 mm (1.77 in)
75 mm (2.95 in)
FMP52: Dimensions of process connection and probe
F
G
ø16 0.63)(
ø16 0.63)(
ø4 0.16)(
ø37 )(1.46
118 .65)(4
LN
ø22 0.87)(
R
B
81.55
(3.21)
ø63.9
(2.52)
ø16 (0.63)
C
81.5
(3.21)
ø90.89
(3.58)
ø16 (0.63)
E
82.95
(3.27)
ø59.8
(2.35)
ø16 (0.63)
D
82.95
(3.27)
ø68.5 (2.7)
ø16 (0.63)
A
81.55
(3.21)
ø50.42 (1.99)
ø59.8
(2.35)
ø16
(0.63)
ø5 (0.2)
A0012757
 31 FMP52: Process connection / probe; dimensions: mm (in). Unit of measurement mm (in)
A Tri-Clamp 1-1/2" (Feature 100)
B Tri-Clamp 2" (Feature 100)
C Tri-Clamp 3" (Feature 100)
D DIN 11851 (Dairy coupling) DN50 (Feature 100)
E Flange ANSI B16.5, EN1092-1, JIS B2220 (Feature 100)
F Rod probe 16mm or 0.63 in , PFA>316L (Feature 060)
G Rope probe 4mm or1/6", PFA>316 (Feature 060)
LN Length of probe
R Reference point of the measurement