Levelflex FMP55
80 Endress+Hauser
Test, Certificate
Feature 580
"Test, Certificate"
Designation Available for
JA 3.1 Material certificate, wetted metallic parts, EN10204-3.1 inspection
certificate
FMP55
JB Conformity to NACE MR0175, wetted metallic parts FMP55
JD 3.1 Material certificate, pressurized parts, EN10204-3.1 inspection
certificate
FMP55
JE Conformity to NACE MR0103, wetted metallic parts FMP55
JF Conformity to AD2000, wetted metallic parts:
Material of all wetted/pressurized parts conform to AD2000 (Technical
rules W2, W9, W10)
FMP55
KE Pressure test, internal procedure, inspection certificate FMP55
KG 3.1 Material certificate+PMI test (XRF), internal procedure, wetted
metallic parts, EN10204-3.1 inspection certificate
FMP55
KV Conformity to ASME B31.3:
The dimensions, materials of construction, pressure / temperature ratings
and identification markings of the device comply with the requirements of
ASME B31.3
FMP55
Test reports, declarations and material test certificates can be obtained electronically from the
W@M Device Viewer :
Enter the serial number from the nameplate (www.endress.com/deviceviewer)
This applies to the options of the following ordering features:
• 550 "Calibration"
• 580 "Test, Certificate"
Product documentation on
paper
Test reports, declarations and material certificates can be ordered as hardcopies via ordering feature
570 "Service", option I7 „Product documentation on paper“. The printouts will be enclosed in the
product delivery.
To Next Page
Loading...
