Levelflex M FMP40 and FMP45 Identification
13
2.2 Scope of delivery
"
Caution!
It is essential to follow the instructions concerning the unpacking, transport and storage of
measuring instruments given in the chapter "Incoming acceptance, transport, storage" on Page 15!
The scope of delivery consists of:
• Assembled instrument
• FieldCare CD-ROM
• FMP4x HART Interface, DTM CD-ROM
• Accessories (→ Chap. 9).
Accompanying documentation:
• Operating manual (this manual)
• Approval documentation: if this is not included in the operating manual.
2.3 Certificates and approvals
CE mark, declaration of conformity
The instrument is designed to meet state-of-the-art safety requirements, has been tested and left the
factory in a condition in which it is safe to operate. The instrument complies with the applicable
standards and regulations as listed in the EC declaration of conformity and thus complies with the
statutory requirements of the EG directives. Endress+Hauser confirms the successful testing of the
instrument by affixing to it the CE mark.
For further information see → Chap. 11.1.7 on Page 71 ff.
2.4 Registered trademarks
KALREZ
®
, VITON
®
, TEFLON
®
Registered trademark of the company, E.I. Du Pont de Nemours & Co., Wilmington, USA
TRI-CLAMP
®
Registered trademark of the company, Ladish & Co., Inc., Kenosha, USA
HART
®
Registered trademark of HART Communication Foundation, Austin, USA
ToF
®
Registered trademark of the company Endress+Hauser GmbH+Co. KG, Maulburg, Germany
PulseMaster
®
Registered trademark of the company Endress+Hauser GmbH+Co. KG, Maulburg, Germany
FieldCare
®
Registered trademark of the company Endress+Hauser Process Solutions AG.
To Next Page
Loading...
