Commissioning Levelflex M FMP40 and FMP45
38
Function "Full calibr."
By this function the distance from the minimum level to the maximum overall level (Span) is
entered.
The 100% Point should not be higher than the overall (total) level!
L00-FMP4xxxx-19-00-00-de-013
"
Achtung!
The usable measurement range is situated between the overall level and the probe length. Especially
for products / media of the upper layer with a dielectric value bigger than 4, the measurement range
can be diminished by adjusting the upper blocking distance.
More information about this topic please refer to function “upper blocking dist.” see page 47.
To Next Page
Loading...
