Levelflex M FMP40 and FMP45 7 Description of Instrument Functions
Endress+Hauser 49
7.5.5 Function "fixed cur. value", HART only
Set the fixed current value with this function. This data is necessary if you have selected the "fixed
current" option in the "curr. output mode" function.
User input:
3,8...20,5 mA
"
Caution!
This user input is available for HART devices only!
7.5.6 Function "simulation"
If necessary, linearisation, the output signal and the current output can be tested with the simulation
function. You have the following simulation options:
Selection:
• sim. off
• sim. volume
• sim. current (HART only)
sim. off
Simulation is switched off.
To Next Page
Loading...
