Endress+Hauser Levelflex M FMP45 - Page 51

Levelflex M FMP40 and FMP45 7 Description of Instrument Functions
Endress+Hauser 51
Dependence
All texts are changed.
"
Caution!
This function is not visualised in Commuwin II!
7.6.2 Function "back to home"
If no entry is made using the display during the specified time period, the display returns to the
measured value display.
9999 s means that there is no return.
User input:
3...9999 s
7.6.3 Function "format display"
Selects the display format.
Selection:
•decimal
•ft-in-1/16"
decimal
The measured value is given in decimal form in the display (e.g. 10.70%).
ft-in-1/16"
The measured value is given in the display in this format (e.g 5'05-14/16").
This option is only possible for "distance unit"-"ft" and "in"!
7.6.4 Function "no.of decimals"
Selection:
•x
•x.x
•x.xx
•x.xxx
7.6.5 Function "sep. character"
Selection:
•.
•,
.
The decimal place is separated by a point.
,
The decimal place is separated by a comma.
7.6.6 Function "display test"
All display pixels are switched on. If the whole LCD is dark, it is working correctly.